Archive course syllabi

List of all syllabi that have been established in LTH's system for postgraduate  education courses. All decided versions are available on the page.



Architecture and Built Environment

Code Name Course plans
AAA030F Tendencies in Architecture Research (7.5 ECTS)
The course is usually given on demand.
Spring 2020
AAA035F Temporality (Tendencies in Architectural and Urban Research) (5.0 ECTS)
The course is usually given every other autumn.
Autumn 2014
AAM001F A Review of Environmental Psychology (7.5 ECTS)
The course is usually given once each term.
Autumn 2013
AAM005F Environmental Psychology Research - Study Design and Methods (7.5 ECTS)
The course is usually given on demand.
Spring 2012
AAM010F History and Development of Environmental Psychology (7.5 ECTS)
The course is usually given on demand.
Spring 2015
AEB001F Advanced Lighting Simulation Course (4.0 ECTS)
The course is usually given on demand.
Spring 2016

Centre for Engineering Education

Code Name Course plans
GEM001F Introduction to Teaching and Learning in Higher Education (3.0 ECTS)
The course is usually given twice per term.
Autumn 2012
GEM002F Introduction to Teaching and Learning in Higher Education (5.0 ECTS)
The course is usually given twice per term.
Spring 2016
GEM006F Communicating Science (5.0 ECTS)
The course is usually given once each term.
Autumn 2012
Spring 2016
GEM011F Project Management in R&D Projects (4.5 ECTS)
The course is usually given each spring term.
Autumn 2013
GEM012F Project Management in Research and Development Projects (5.0 ECTS)
The course is usually given each spring term.
Spring 2015
GEM016F Project Management in R&D Projects, Specialisation (4.5 ECTS)
The course is usually given each spring term.
Autumn 2013
GEM017F Project Management in Research and Development Projects, Specialisation (3.0 ECTS)
The course is usually given each spring term.
Spring 2015
GEM026F Technology, Risk and Research Ethics (4.5 ECTS)
The course is usually given each spring term.
Autumn 2019
GEM041F Theory of Science and Methodology of Research (4.5 ECTS)
The course is usually given each autumn term.
Autumn 2019
GEM046F Scientific Information Management (3.0 ECTS)
The course is usually given once each term.
Autumn 2019
GEM056F Introductory Workshop for Newly Admitted PhD Students at Faculty of Engineering at Lund University (2.0 ECTS)
The course is usually given once each term.
Autumn 2013
GEM060F Reading Skills and the Discourse of the Research Article (3.0 ECTS)
The course is usually given each autumn term.
Autumn 2013
GEM065F Academic Writing for Publication in the Engineering and Science Disciplines (6.0 ECTS)
The course is usually given each spring term.
Autumn 2013
GEM075F Ethics, Integrity, and Misconduct in Research (1.5 ECTS)
The course is usually given on demand.
Autumn 2018
GEM025F Technology, Risk and Research Ethics (4.5 ECTS)
The course is discontinued and will no longer be given.
Autumn 2013
GEM040F Theory of Science and Methodology of Research (4.5 ECTS)
The course is discontinued and will no longer be given.
Autumn 2013
GEM045F Scientific Information Management (3.0 ECTS)
The course is discontinued and will no longer be given.
Autumn 2013

Computer Science (LTH)

Code Name Course plans
EDA010F Distributed Algorithms (7.5 ECTS)
The course is usually given on demand.
Spring 2013
EDA015F Advanced Concurrent Programming in Java (7.5 ECTS)
The course is usually given on demand.
Autumn 2013
EDA020F Case Studies in Software Engineering (7.5 ECTS)
The course is usually given on demand.
Autumn 2015
EDA025F Programming Models and Practice for Big Data (7.5 ECTS)
The course is usually given on demand.
Autumn 2015
EDA030F Discrete Structures and Introduction to Proofs (6.0 ECTS)
The course is usually given on demand.
Spring 2016
EDA035F Research Methods, Ethics and Innovation in Systems and Software (4.5 ECTS)
The course is usually given on demand.
Spring 2017
EDA040F Software Engineering and Cloud Computing (6.0 ECTS)
The course is usually given on demand.
Spring 2017
EDA045F Program Analysis (7.5 ECTS)
The course is usually given every other autumn.
Autumn 2018
EDA050F Web Programming (7.5 ECTS)
The course is usually given on demand.
Autumn 2018
EDA055F Graphical Models, Bayesian Learning, and Statistical Relational Learning (6.0 ECTS)
The course is usually given on demand.
Autumn 2019
EDAF30F Programming - Second Course (7.5 ECTS)
The course is usually given on demand.
Autumn 2019
EDAF50F C++ - Programming (7.5 ECTS)
The course is usually given each autumn term.
Spring 2018
EDAF70F Applied Artificial Intelligence (7.5 ECTS)
The course is usually given once each term.
Spring 2017
EDAF80F Computer Graphics (7.5 ECTS)
The course is usually given each autumn term.
Autumn 2017
EDAN01F Constraint Programming (7.5 ECTS)
The course is usually given once each term.
Autumn 2017
EDAN20F Language Technology (7.5 ECTS)
The course is usually given once each term.
Autumn 2017
EDAN35F High Performance Computer Graphics (7.5 ECTS)
The course is usually given each autumn term.
Autumn 2017
EDAN40F Functional Programming (7.5 ECTS)
The course is usually given each spring term.
Spring 2017
EDAN55F Advanced Algorithms (7.5 ECTS)
The course is usually given each autumn term.
Autumn 2017
EDAN65F Compilers (7.5 ECTS)
The course is usually given each autumn term.
Autumn 2017
EDAN70F Project in Computer Science (7.5 ECTS)
The course is usually given twice per term.
Autumn 2017
EDAN75F Optimising Compilers (7.5 ECTS)
The course is usually given every other autumn.
Spring 2018
EDAN95F Applied Machine Learning (7.5 ECTS)
The course is usually given each autumn term.
Autumn 2018

Department of Physics

Code Name Course plans
FAF015F Quantum Information (7.5 ECTS)
The course is usually given every other spring.
Spring 2015
FAF020F LLC-course: Probing Matter with Light (5.0 ECTS)
The course is usually given on demand.
Autumn 2016
FAF025F Theory of Superconductivity (7.5 ECTS)
The course is usually given on demand.
Autumn 2019
FAF095F Photonics and Optical Communication (7.5 ECTS)
The course is usually given each spring term.
Autumn 2013
FAF150F Medical Optics (7.5 ECTS)
The course is usually given each spring term.
Autumn 2013
FAFF01F Optics and Optical Design (7.5 ECTS)
The course is usually given each autumn term.
Autumn 2013
FAFF20F Multi-spectral Imaging (7.5 ECTS)
The course is usually given each autumn term.
Autumn 2013
FAFN01F Lasers (7.5 ECTS)
The course is usually given each autumn term.
Autumn 2013
FAFN05F Light - Matter Interaction (7.5 ECTS)
The course is usually given each spring term.
Autumn 2013
FAFN10F Advanced Optics and Lasers (7.5 ECTS)
The course is usually given each spring term.
Autumn 2013
FAFN15F Crystal Growth and Semiconductor Epitaxy (7.5 ECTS)
The course is usually given each spring term.
Autumn 2014
FAFN25F Atomic and Molecular Spectroscopy (7.5 ECTS)
The course is usually given each autumn term.
Autumn 2019
FBR001F Fundamental Combustion (7.5 ECTS)
The course is usually given each spring term.
Spring 2017
Autumn 2017
FBR002F Laser-Based Combustion Diagnostics (7.5 ECTS)
The course is usually given once each term.
Spring 2018
FBR031F Molecular Physics (7.5 ECTS)
The course is usually given every other autumn.
Autumn 2019
FFF021F Semiconductor Physics (7.5 ECTS)
The course is usually given each autumn term.
Spring 2015
FFF025F Metal Organic Vapor Phase Epitaxy (7.5 ECTS)
The course is usually given on demand.
Autumn 2019
FFFN05F Nanomaterials - Thermodynamics and Kinetics (7.5 ECTS)
The course is usually given each autumn term.
Autumn 2013
FFFN20F Experimental Biophysics (15.0 ECTS)
The course is usually given each spring term.
Spring 2020
FFFN25F Optoelectronics and Optical Communication (7.5 ECTS)
The course is usually given each spring term.
Spring 2017
FFFN35F The Physics of Low-dimensional Structures and Quantum Devices (7.5 ECTS)
The course is usually given each autumn term.
Autumn 2019
FKF025F PIXE - Theory and Applications (7.5 ECTS)
The course is usually given on demand.
Autumn 2016
FKF030F First Steps in Biosphere-Atmosphere Modelling (5.0 ECTS)
The course is usually given every other spring.
Spring 2019
FKF035F Atmospheric Chemistry and Physics (7.5 ECTS)
The course is usually given each spring term.
Spring 2020
FKF070F Modern Subatomic Physics (7.5 ECTS)
The course is usually given each spring term.
Spring 2013
Spring 2014
FKF100F Methods for Environmental Monitoring (7.5 ECTS)
The course is usually given each spring term.
Autumn 2016
FKFN05F Experimental Tools for Subatomic Physics (7.5 ECTS)
The course is usually given each autumn term.
Autumn 2016
FKFN20F Nuclear Physics, Advanced Course (7.5 ECTS)
The course is usually given each autumn term.
Autumn 2016
FKFN25F Applied Nuclear, Neutron and Reactor Physics (7.5 ECTS)
The course is usually given each spring term.
Autumn 2016
FMF005F Modern Trends in Many-Body and Theoretical Physics (8.0 ECTS)
The course is usually given on demand.
Autumn 2018
FMFN05F Chaos (7.5 ECTS)
The course is usually given each spring term.
Spring 2019
FAF080F Atomic and Molecular Spectroscopy (7.5 ECTS)
The course is discontinued and will no longer be given.
Autumn 2013
FBR024F Laser-Based Combustion Diagnostics (7.5 ECTS)
The course is discontinued and will no longer be given.
Autumn 2013
FKF021F Nuclear Physics, Advanced Course (7.5 ECTS)
The course is discontinued and will no longer be given.
Spring 2014
FKFF01F Atmospheric Chemistry and Physics (4.0 ECTS)
The course is discontinued and will no longer be given.
Spring 2014
FKFN10F Nuclear Reactor Physics (7.5 ECTS)
The course is discontinued and will no longer be given.
Spring 2013

Immunotechnology

Code Name Course plans
KIM001F Molecular Biology (7.5 ECTS)
The course is usually given on demand.
Spring 2013
KIM005F Cell Biology (7.5 ECTS)
The course is usually given on demand.
Spring 2013
KIM011F Tumor Biology (7.5 ECTS)
The course is usually given every other autumn.
Autumn 2014
KIM015F Proteomics 1 (15.0 ECTS)
The course is usually given on demand.
Spring 2014
KIM020F Advanced Biological Mass Spectrometry (15.0 ECTS)
The course is usually given every other spring.
Spring 2014
KIM025F Molecular Biology, Reading Course (7.5 ECTS)
The course is usually given on demand.
Autumn 2014
KIM030F Scientific Outlook (7.5 ECTS)
The course is usually given once each term.
Spring 2013
KIM035F Current Advances in Immunotechnology and Proteomics (6.0 ECTS)
The course is usually given once each term.
Autumn 2014
KIM040F Scientific Outlook (5.0 ECTS)
The course is usually given once each term.
Spring 2015
KIM045F Cell Biology, Reading Course (7.5 ECTS)
The course is usually given on demand.
Autumn 2015
KIM050F Cell Culture Management and Safety in Mammalian Cell Culture Work (1.5 ECTS)
The course is usually given on demand.
Autumn 2016
KIM055F Immunology (15.0 ECTS)
The course is usually given on demand.
Autumn 2016
KIM060F Protein Microarray Techniques (3.0 ECTS)
The course is usually given on demand.
Autumn 2016
KIM065F Proteomics Data Analysis (3.0 ECTS)
The course is usually given on demand.
Autumn 2016
KIM070F Oncoimmunology (7.5 ECTS)
The course is usually given on demand.
Autumn 2018
KIM075F Immune Cell Flow Cytometry (3.0 ECTS)
The course is usually given on demand.
Autumn 2018

Biomedical Engineering

Code Name Course plans
BMEN01F Biomedical Signal Processing (7.5 ECTS)
The course is usually given each spring term.
Spring 2017
BMEN05F Biomechanics (7.5 ECTS)
The course is usually given each autumn term.
Autumn 2018
BMEN10F Tissue Biomechanics (7.5 ECTS)
The course is usually given each autumn term.
Autumn 2017
BMEN15F Optimum and Adaptive Signal Processing (7.5 ECTS)
The course is usually given each autumn term.
Autumn 2018
BMEN16F Signal Separation - Independent Components (7.5 ECTS)
The course is usually given each autumn term.
Autumn 2019
EEMF05F Biomedical Measurements (7.5 ECTS)
The course is usually given each autumn term.
Autumn 2018
EEMN05F EMC, Noise and Noise Reduction (7.5 ECTS)
The course is usually given each autumn term.
Autumn 2017
Autumn 2019
EEMN10F Computerised Measurement Systems (7.5 ECTS)
The course is usually given each autumn term.
Autumn 2017
EEMN15F Ultrasound Physics and Technology (7.5 ECTS)
The course is usually given each spring term.
Autumn 2017
EEMN21F Introduction to Microfluidics and Lab-on-a-Chip Systems (7.5 ECTS)
The course is usually given once each term.
Autumn 2017
EEMN26F Lab-on-a-chip in Biomedical Applcations (7.5 ECTS)
The course is usually given each spring term.
Spring 2018
EIEN25F Power Electronics - Devices, Converters, Control and Applications (15.0 ECTS)
The course is usually given each spring term.
Spring 2019
EIEN35F Automation for Complex Systems (7.5 ECTS)
The course is usually given each spring term.
Spring 2019

Dept of Building and Environmental Techn

Code Name Course plans
VBK001F Reliability of Structures (7.5 ECTS)
The course is usually given on demand.
Autumn 2014
VBK005F Structural Stability (7.5 ECTS)
The course is usually given once each term.
Autumn 2015
VBK010F Timber Engineering (7.5 ECTS)
The course is usually given on demand.
Spring 2017
VBM001F Introduction to Isothermal Calorimetry (4.5 ECTS)
The course is usually given every other spring.
Spring 2013
Spring 2016
VBM015F Experiment (8.0 ECTS)
The course is usually given on demand.
Spring 2014
VBM020F Cement and Concrete (8.0 ECTS)
The course is usually given on demand.
Spring 2016
VBR001F Fire Dynamics in Tunnels (7.5 ECTS)
The course is usually given on demand.
Spring 2017
VRS001F Gender, Disasters and Climate Risk (3.0 ECTS)
The course is usually given each autumn term.
Autumn 2018
VRSN45F Critical Infrastructure Resilience (7.5 ECTS)
The course is usually given each autumn term.
Autumn 2019
VVR045F Advanced Hydrology (7.5 ECTS)
The course is usually given on demand.
Autumn 2016
VVR050F Advanced Hydraulics (7.5 ECTS)
The course is usually given every other spring.
Spring 2017
VVR055F Management for the Water Sector (3.0 ECTS)
The course is usually given on demand.
Spring 2018
VVR060F Water Energy Nexus (3.0 ECTS)
The course is usually given on demand.
Spring 2018
VVR065F Introduction to Water Resources Engineering (3.0 ECTS)
The course is usually given every other spring.
Autumn 2019
VBM005F Evaluating Measurements with MATLAB (4.5 ECTS)
The course is discontinued and will no longer be given.
Spring 2013

Department of Construction Sciences

Code Name Course plans
FHL001F Advanced Fracture Mechanics (7.5 ECTS)
The course is usually given on demand.
Spring 2014
FHL005F Finite Element, Advanced Topics (7.5 ECTS)
The course is usually given on demand.
Spring 2014
FHL010F Computational Materials Science (7.5 ECTS)
The course is usually given on demand.
Spring 2014
FHL015F Contact Mechanics (7.5 ECTS)
The course is usually given on demand.
Autumn 2015
VSM001F Introduction to Fracture Mechanics (8.0 ECTS)
The course is usually given on demand.
Spring 2014
VSM005F Introduction to Fracture Mechanics (4.0 ECTS)
The course is usually given on demand.
Spring 2014

Department of Design Sciences

Code Name Course plans
IDE020F Introduction to PhD studies at the Department of Design Sciences (4.0 ECTS)
The course is usually given on demand.
Spring 2014
IDE025F Labview Programming - with a Focus on Aerosol and Thermal Lab Environments (8.0 ECTS)
The course is usually given once each term.
Autumn 2014
IDE030F Design Research: Theory and Perspectives (5.0 ECTS)
The course is usually given on demand.
Autumn 2015
IDE035F The Designer/Engineer and Sustainable Development (7.5 ECTS)
The course is usually given on demand.
Spring 2016
IDE040F Business Models and Business Model Innovation (7.5 ECTS)
The course is usually given every other autumn.
Autumn 2017
IDE045F Research Seminars in Design and Innovation (7.5 ECTS)
The course is usually given on demand.
Spring 2018
IDE050F Sustainable Development - Basics (3.0 ECTS)
The course is usually given on demand.
Spring 2018
IDE055F Sustainable Development – a Systems View (5.0 ECTS)
The course is usually given on demand.
Spring 2018
INT001F Innovation and Value Creation in Research (4.0 ECTS)
The course is usually given each spring term.
Spring 2018
MAM001F Particles and Health (6.0 ECTS)
The course is usually given on demand.
Spring 2015
MAM005F Applied Statistics (1.5 ECTS)
The course is usually given on demand.
Autumn 2016
MAM010F Reading Course in Aerosol Science (7.5 ECTS)
The course is usually given on demand.
Spring 2017
MAM015F Airborne Transmission of Infectious Agents (2.0 ECTS)
The course is usually given every other spring.
Spring 2017
MAM020F Working Environment and Human Factors (15.0 ECTS)
The course is usually given on demand.
Autumn 2017
MAM025F Seminar Course in Aerosol Technology (5.0 ECTS)
The course is usually given once each term.
Autumn 2018
MAM030F Nanosafety (5.0 ECTS)
The course is usually given on demand.
Spring 2019
MAM035F Nanosafety - with Project (7.5 ECTS)
The course is usually given on demand.
Autumn 2019
MAM242F Aerosol Technology (7.5 ECTS)
The course is usually given once each term.
Autumn 2015
MAMF35F Human in Extreme Environments (7.5 ECTS)
The course is usually given each spring term.
Spring 2020
MMK001F Basic Product Development Theory (7.5 ECTS)
The course is usually given on demand.
Spring 2014
Autumn 2017
MMK005F Advanced Product Development Theory (7.5 ECTS)
The course is usually given on demand.
Spring 2014
Autumn 2017
TNS010F Introduction to Rehabilitation Engineering as a Research Subject (7.5 ECTS)
The course is usually given on demand.
Autumn 2014

Electrical and Information Technology

Code Name Course plans
EDIN01F Cryptography (7.5 ECTS)
The course is usually given each autumn term.
Autumn 2018
EDIN05F Mathematical Cryptology (7.5 ECTS)
The course is usually given each spring term.
Spring 2013
EIT046F Queuing Theory (7.5 ECTS)
The course is usually given every other autumn.
Autumn 2013
EIT060F Estimation Theory (9.0 ECTS)
The course is usually given on demand.
Spring 2015
EIT070F Electromagnetic Theory, Advanced Course (12.0 ECTS)
The course is usually given every other spring.
Spring 2013
EIT075F Computer Arithmetic: Algorithms and Architectures (7.5 ECTS)
The course is usually given each autumn term.
Autumn 2013
EIT085F Digital Filters and Signal Processing (7.5 ECTS)
The course is usually given each autumn term.
Autumn 2013
EIT090F Integer Programming (7.5 ECTS)
The course is usually given every other spring.
Autumn 2014
EIT095F Low Power Circuit Design (7.5 ECTS)
The course is usually given each spring term.
Spring 2014
EIT100F Design, Build and Test a Radar System (7.5 ECTS)
The course is usually given each autumn term.
Autumn 2013
EIT105F Fundamentals on Accelerator Physics (3.0 ECTS)
The course is usually given on demand.
Spring 2015
EIT110F Digital Communications (9.0 ECTS)
The course is usually given on demand.
Autumn 2014
EIT115F Physics of Nanoscale MOSFETs (7.5 ECTS)
The course is usually given on demand.
Autumn 2014
EIT120F Digital Communications with Project (10.5 ECTS)
The course is usually given on demand.
Autumn 2014
EIT125F Applications of Game Theory in Wireless Networks (3.0 ECTS)
The course is usually given on demand.
Autumn 2015
EIT130F Content Delivery Networks (CDNs): Architectures, Techniques and Performance (5.0 ECTS)
The course is usually given on demand.
Autumn 2015
EIT135F Stochastic Optimization for Communication Networks (7.5 ECTS)
The course is usually given on demand.
Autumn 2016
EIT140F More than Moore - Electronics of the Future (7.5 ECTS)
The course is usually given on demand.
Spring 2017
EIT145F Fundamentals of Information Theory (7.5 ECTS)
The course is usually given on demand.
Spring 2016
EIT150F Fundamentals of Information Theory - Project (1.5 ECTS)
The course is usually given on demand.
Spring 2016
EIT155F Introduction to Machine Learning (7.5 ECTS)
The course is usually given on demand.
Autumn 2016
EIT160F Design and Theory of Phase Locked Loops (7.5 ECTS)
The course is usually given on demand.
Autumn 2017
EIT165F Detection Theory (9.0 ECTS)
The course is usually given on demand.
Autumn 2017
EIT170F Routing - A Practical Introduction to Router and Unicast Routing Protocol Management (6.0 ECTS)
The course is usually given on demand.
Spring 2018
EIT175F Modern Wireless Systems - LTE and Beyond (7.5 ECTS)
The course is usually given each autumn term.
Autumn 2018
EIT180F Nanoelectronic Device Processing (15.0 ECTS)
The course is usually given on demand.
Spring 2019
EIT185F Building Adaptive Networks with Software Defined Networking (10.0 ECTS)
The course is usually given on demand.
Autumn 2018
EITF20F Computer Architecture (7.5 ECTS)
The course is usually given each autumn term.
Autumn 2017
EITF80F Electromagnetic Fields (7.5 ECTS)
The course is usually given each autumn term.
Autumn 2018
EITN10F Multiple Antenna Systems (7.5 ECTS)
The course is usually given each autumn term.
Autumn 2013
EITN41F Advanced Web Security (7.5 ECTS)
The course is usually given each autumn term.
Autumn 2018
EITN45F Information Theory (7.5 ECTS)
The course is usually given each spring term.
Spring 2018
EITN65F Measurement and Modeling of the Central Nervous System Function (7.5 ECTS)
The course is usually given each spring term.
Spring 2017
EITN70F Channel Coding for Reliable Communication (7.5 ECTS)
The course is usually given each autumn term.
Autumn 2017
EITN75F Wireless System Design Principles (7.5 ECTS)
The course is usually given each spring term.
Spring 2018
EITN80F Electrodynamics (7.5 ECTS)
The course is usually given each spring term.
Spring 2018
EITN90F Radar and Remote Sensing (7.5 ECTS)
The course is usually given each spring term.
Spring 2018
EITP01F High Speed Devices (7.5 ECTS)
The course is usually given each spring term.
Spring 2018
EITP05F Nanoelectronics (7.5 ECTS)
The course is usually given each spring term.
Spring 2018
ETEN01F Microwave Theory (7.5 ECTS)
The course is usually given each spring term.
Spring 2013
ETEN05F Electromagnetic Wave Propagation (7.5 ECTS)
The course is usually given each autumn term.
Autumn 2013
ETI260F Computational Electromagnetics (6.0 ECTS)
The course is usually given on demand.
Autumn 2019
ETIN10F Chanel Modelling for Wireless Communication (7.5 ECTS)
The course is usually given each spring term.
Spring 2013
ETIN25F Analogue IC-design (7.5 ECTS)
The course is usually given each autumn term.
Autumn 2013
ETIN30F Integrated Radio Electronics (7.5 ECTS)
The course is usually given each spring term.
Spring 2013
ETIN45F DSP-design (7.5 ECTS)
The course is usually given each autumn term.
Autumn 2013
ETIN50F RF Amplifier Design (7.5 ECTS)
The course is usually given each autumn term.
Autumn 2013
ETIN55F Integrated AD and DA Converters (7.5 ECTS)
The course is usually given each autumn term.
Autumn 2013
ETIN60F Advanced AD/DA Converters (7.5 ECTS)
The course is usually given each spring term.
Spring 2013
ETIN65F Radio Project (7.5 ECTS)
The course is usually given each spring term.
Spring 2013
ETIN70F Modern Electronics (7.5 ECTS)
The course is usually given each autumn term.
Autumn 2018
ETIN75F Advanced Analogue Design (7.5 ECTS)
The course is usually given each spring term.
Spring 2013
ETS061F Simulation (7.5 ECTS)
The course is usually given each spring term.
Spring 2017
ETSN10F Network Architecture and Performance (7.5 ECTS)
The course is usually given each autumn term.
Autumn 2018
EITN55F Signal Separation - Independent Components (7.5 ECTS)
The course is discontinued and will no longer be given.
Autumn 2014

Energy Sciences

Code Name Course plans
MMV031F Heat Transfer (7.5 ECTS)
The course is usually given each spring term.
Spring 2017
MMV042F Numerical Heat Transfer (9.0 ECTS)
The course is usually given each autumn term.
Autumn 2013
MVK020F Engine Control (5.0 ECTS)
The course is usually given every other autumn.
Autumn 2013
MVK025F Fuel Cell Technology (6.0 ECTS)
The course is usually given each autumn term.
Autumn 2013
MVK030F Experimental Methodology (7.5 ECTS)
The course is usually given every other spring.
Spring 2014
MVK035F Advanced Theory of Turbomachinery (7.5 ECTS)
The course is usually given on demand.
Spring 2014
MVK040F Internal Combustion Engine Fundamentals (15.0 ECTS)
The course is usually given on demand.
Spring 2016
MVK161F Heat and Mass Transfer (9.0 ECTS)
The course is usually given each spring term.
Spring 2013
MVKF15F Introduction to Vehicle Systems (7.5 ECTS)
The course is usually given once each term.
Autumn 2013
MVKN55F Advanced Combustion Engine Concepts (7.5 ECTS)
The course is usually given each autumn term.
Autumn 2019
MVKN70F Advanced Methods for Numerical Fluid Dynamics and Heat Transfer (7.5 ECTS)
The course is usually given once each term.
Autumn 2019
MVKN90F Turbulence - Theory and Modelling (7.5 ECTS)
The course is usually given each autumn term.
Autumn 2019
MVK015F Reacting Transport Phenomena and Modeling (9.0 ECTS)
The course is discontinued and will no longer be given.
Spring 2013

Chemical Engineering

Code Name Course plans
KET040F Membrane Process Applications (5.0 ECTS)
The course is usually given on demand.
Autumn 2013
KET045F Transport Phenomena in Membrane Processes (5.0 ECTS)
The course is usually given on demand.
Autumn 2013
KET055F Model Calibration of Process Systems (5.0 ECTS)
The course is usually given on demand.
Autumn 2014
KET080F Modelling in Systems Biotechnology (7.5 ECTS)
The course is usually given on demand.
Autumn 2013
KET085F Preparative Chromatography (5.0 ECTS)
The course is usually given on demand.
Spring 2014
KET090F Research Ethics in practice (4.0 ECTS)
The course is usually given on demand.
Autumn 2014
KET095F Industrial Biorefineries (7.5 ECTS)
The course is usually given every other spring.
Spring 2017
KET100F Popular Science Writing for Water Researchers (3.0 ECTS)
The course is usually given once each term.
Autumn 2017
KET105F Catalysis (2.0 ECTS)
The course is usually given once each term.
Spring 2016
KET110F Gas-Liquid Reactions (7.5 ECTS)
The course is usually given on demand.
Autumn 2017
KET115F Optimization of Process System (7.5 ECTS)
The course is usually given on demand.
Spring 2018
KET120F Micropollutants in Wastewater Treatment (5.0 ECTS)
The course is usually given on demand.
Autumn 2019
KET121F Model Calibration of Process Systems (7.5 ECTS)
The course is usually given on demand.
Autumn 2019
KETN10F Applied Transport Phenomena (7.5 ECTS)
The course is usually given each autumn term.
Spring 2014
KETN30F Biochemical Reaction Engineering (7.5 ECTS)
The course is usually given each autumn term.
Autumn 2018
VVAN20F Advanced Wastewater Treatment (7.5 ECTS)
The course is usually given each spring term.
Spring 2019
KAT002F Transport Phenomena (7.5 ECTS)
The course is discontinued and will no longer be given.
Spring 2013
KET070F Optimization of Process Systems (5.0 ECTS)
The course is discontinued and will no longer be given.
Spring 2013
KET075F Numerical Methods in Matlab (2.0 ECTS)
The course is discontinued and will no longer be given.
Spring 2013

Food Technology, Engineering, Nutrition

Code Name Course plans
KLG001F Theory and Applications of Pickering Emulsions in Food and Pharmaceutical Technology (6.0 ECTS)
The course is usually given on demand.
Autumn 2017
KLG060F Food Chemistry for Product Formulation (7.5 ECTS)
The course is usually given each autumn term.
Autumn 2014
KLGN01F Probiotics (7.5 ECTS)
The course is usually given each autumn term.
Autumn 2014
KNL026F Physiology (7.5 ECTS)
The course is usually given each autumn term.
Autumn 2013
KNLN01F Human Nutrition (7.5 ECTS)
The course is usually given each spring term.
Autumn 2013

Department of Machine Technology

Code Name Course plans
FMEN02F Multibody Dynamics (7.5 ECTS)
The course is usually given each spring term.
Autumn 2018
FMEN11F Mechanical Vibrations (7.5 ECTS)
The course is usually given each autumn term.
Autumn 2018
FMEN21F Continuum Mechanics (7.5 ECTS)
The course is usually given each autumn term.
Autumn 2018
FMEN25F Nano Mechanics and Multiscale Modelling (7.5 ECTS)
The course is usually given once each term.
Autumn 2018
FMEN30F Fatigue (7.5 ECTS)
The course is usually given each autumn term.
Autumn 2018
MMT001F International Production (7.5 ECTS)
The course is usually given on demand.
Spring 2014
MMT005F Advanced Workshop Practice (7.5 ECTS)
The course is usually given on demand.
Autumn 2014
MMT010F Introduction to ESS (7.5 ECTS)
The course is usually given on demand.
Autumn 2014
MMT015F Material and Process Selection (7.5 ECTS)
The course is usually given on demand.
Autumn 2014
MMT020F Cryogenics (7.5 ECTS)
The course is usually given on demand.
Autumn 2015
MMT031F Production Technology (7.5 ECTS)
The course is usually given on demand.
Spring 2017
MMT045F Manufacturing Systems, Basic Course (7.5 ECTS)
The course is usually given on demand.
Spring 2014
MMT220F Metal Cutting, Advanced Course (7.5 ECTS)
The course is usually given on demand.
Autumn 2013
MMTN01F Project - Production and Materials Engineering (7.5 ECTS)
The course is usually given on demand.
Spring 2014
MMTN05F Manufacturing Systems, Advanced Course (7.5 ECTS)
The course is usually given on demand.
Spring 2014

Technology and Society

Code Name Course plans
FMI010F Basic Course on Method and Theory in Research (7.5 ECTS)
The course is usually given on demand.
Spring 2013
VFT005F Public Economics (7.5 ECTS)
The course is usually given on demand.
Autumn 2015
VFT010F Quantitative Methods (7.5 ECTS)
The course is usually given on demand.
Autumn 2016
VTV001F Qualitative Research Methods (7.5 ECTS)
The course is usually given on demand.
Spring 2013
VTV005F Evaluation of ITS Applications (5.0 ECTS)
The course is usually given on demand.
Spring 2013
VTV010F Evaluation of ITS Applications (7.5 ECTS)
The course is usually given every other spring.
Spring 2014
VTV015F Public Transport Research - an Overview (7.5 ECTS)
The course is usually given on demand.
Autumn 2016
VTV020F Transport Science - Overview (7.5 ECTS)
The course is usually given once each term.
Autumn 2017

Industrial Management and Logistics

Code Name Course plans
MIO005F Advanced Queueing Theory with Applications (7.5 ECTS)
The course is usually given on demand.
Spring 2013
MTT050F Empirical Methods in Logistics and Supply Chain Management (SCM) (3.0 ECTS)
The course is usually given on demand.
Spring 2013
MTT055F Reviewing for Journals (5.0 ECTS)
The course is usually given on demand.
Autumn 2014

Department of Chemistry

Code Name Course plans
KAK050F Chromatographic Analysis (7.5 ECTS)
The course is usually given each autumn term.
Autumn 2013
KAS001F Environmental Issues and Hazards in the Chemical Research Laboratory (2.0 ECTS)
The course is usually given on demand.
Autumn 2016
KAS002F Computational Chemistry for Organic Chemists (7.5 ECTS)
The course is usually given on demand.
Spring 2019
KAS003F Advanced Organic Synthesis (7.5 ECTS)
The course is usually given on demand.
Autumn 2018
KASN20F Polymer Physics (7.5 ECTS)
The course is usually given each spring term.
Spring 2018
KASN25F Polymer Chemistry (7.5 ECTS)
The course is usually given each autumn term.
Autumn 2017
KBK031F Enzyme Technology (7.5 ECTS)
The course is usually given each autumn term.
Autumn 2016
KBT001F Enzyme Kinetics (7.5 ECTS)
The course is usually given on demand.
Autumn 2012
KBT005F Entrepreneurship in Biotechnology (7.5 ECTS)
The course is usually given each autumn term.
Autumn 2013
KBT015F Bioorganic Synthesis (7.5 ECTS)
The course is usually given on demand.
Spring 2019
KFKN01F Magnetic Resonance - Spectroscopy and Imaging (7.5 ECTS)
The course is usually given each spring term.
Spring 2013
KFKN10F Biophysical Chemistry (7.5 ECTS)
The course is usually given each autumn term.
Autumn 2017
KMB001F Advanced Microbiology (15.0 ECTS)
The course is usually given each autumn term.
Autumn 2014
KMB010F Advanced Microbial Physiology (7.5 ECTS)
The course is usually given each autumn term.
Spring 2015
KMB040F Metabolic Engineering (7.5 ECTS)
The course is usually given each autumn term.
Spring 2014
KOK002F Advanced Physical Organic Chemistry (15.0 ECTS)
The course is usually given on demand.
Autumn 2016
KOKN01F Medicinal Chemistry (7.5 ECTS)
The course is usually given each autumn term.
Autumn 2013
GEM070F Innovation and Value Creation in Research (3.0 ECTS)
The course is discontinued and will no longer be given.
Spring 2014
KBT010F Research Innovation and Value Creation in Life Science (3.0 ECTS)
The course is discontinued and will no longer be given.
Spring 2016

Centre of Mathematical Sciences

Code Name Course plans
FMA003F Functional Analysis in System Theory (9.0 ECTS)
The course is usually given on demand.
Autumn 2013
FMA022F Introduction to Partial Differential Equations (7.5 ECTS)
The course is usually given each spring term.
Autumn 2013
FMA026F Mathematics Education from a University Perspective (7.5 ECTS)
The course is usually given on demand.
Autumn 2013
FMA030F Algebraic Geometry (6.0 ECTS)
The course is usually given on demand.
Spring 2014
FMA085F Machine Learning (5.0 ECTS)
The course is usually given on demand.
Autumn 2012
FMA091F Discrete Mathematics (7.5 ECTS)
The course is usually given each spring term.
Autumn 2013
FMA095F Lie Algebras (6.0 ECTS)
The course is usually given on demand.
Autumn 2013
FMA100F Geometric Measure Theory (15.0 ECTS)
The course is usually given on demand.
Spring 2013
FMA105F Image Analysis for PhD Students (7.5 ECTS)
The course is usually given on demand.
Autumn 2013
FMA121F Matrix Theory, Minor Course (6.0 ECTS)
The course is usually given each autumn term.
Autumn 2017
FMA122F Matrix Theory (7.5 ECTS)
The course is usually given each autumn term.
Autumn 2019
FMA130F Analytic Functions (6.0 ECTS)
The course is usually given once each term.
Autumn 2013
FMA145F Partial Differential Equations (7.5 ECTS)
The course is usually given on demand.
Autumn 2018
FMA150F Algebraic Geometry and Solving Systems of Polynomial Equations (7.5 ECTS)
The course is usually given on demand.
Spring 2018
FMA155F Engelska:Anisotropic Banach Spaces for Hyperbolic Dynamics (4.0 ECTS)
The course is usually given on demand.
Autumn 2018
FMA160F Riemannian Geometry (7.5 ECTS)
The course is usually given once each term.
Autumn 2018
FMA171F Image Analysis (7.5 ECTS)
The course is usually given each autumn term.
Autumn 2013
FMA201F Calculus of Variations (7.5 ECTS)
The course is usually given each spring term.
Autumn 2013
FMA240F Linear and Combinatorial Optimization (6.0 ECTS)
The course is usually given each spring term.
Autumn 2013
FMA250F Partial Differential Equations with Distribution Theory (7.5 ECTS)
The course is usually given every other autumn.
Autumn 2013
FMA271F Computer Vision (7.5 ECTS)
The course is usually given each spring term.
Autumn 2013
FMA275F Numerical Optimization (7.5 ECTS)
The course is usually given on demand.
Autumn 2015
FMA280F An Introduction to Set Theory (5.0 ECTS)
The course is usually given on demand.
Spring 2017
FMA300F Riesz Products and Applications (5.0 ECTS)
The course is usually given on demand.
Spring 2015
FMA305F Potential Theory in the Complex Plane (7.5 ECTS)
The course is usually given on demand.
Autumn 2018
FMAF05F Mathematics - Systems and Transforms (7.0 ECTS)
The course is usually given once each term.
Autumn 2018
FMAN01F Biomathematics (7.5 ECTS)
The course is usually given every other spring.
Autumn 2013
FMAN10F Algebraic Structures (7.5 ECTS)
The course is usually given each spring term.
Autumn 2013
FMAN15F Non-linear Dynamical Systems (7.5 ECTS)
The course is usually given each autumn term.
Autumn 2014
FMAN30F Medical Image Analysis (7.5 ECTS)
The course is usually given each autumn term.
Autumn 2014
FMAN45F Introduction to Machine Learning (7.5 ECTS)
The course is usually given each spring term.
Autumn 2016
FMAN60F Optimization (6.0 ECTS)
The course is usually given each autumn term.
Autumn 2019
FMAN80F Functional Analysis and Harmonic Analysis (7.5 ECTS)
The course is usually given each autumn term.
Autumn 2019
FMN001F Isogeometric Analysis: CAD in FEM (7.5 ECTS)
The course is usually given on demand.
Spring 2014
FMN005F Computational Linear Algebra (7.5 ECTS)
The course is usually given on demand.
Autumn 2013
FMN010F Numerical Methods for Deterministic and Stochastic Differential Equations (7.5 ECTS)
The course is usually given on demand.
Autumn 2013
FMN015F Finite Volume Methods (7.5 ECTS)
The course is usually given every other autumn.
Autumn 2014
FMN020F Iterative Solution of Large Scale Systems in Scientific Computing (7.5 ECTS)
The course is usually given each spring term.
Spring 2016
FMNN02F Introduction to Numerical Linear Algebra (7.5 ECTS)
The course is usually given each autumn term.
Autumn 2019
FMNN05F Simulation Tools (7.5 ECTS)
The course is usually given each autumn term.
Autumn 2013
FMNN10F Numerical Methods for Differential Equations (7.5 ECTS)
The course is usually given each autumn term.
Autumn 2019
FMNN20F Numerical Analysis for Elliptic and Parabolic Differential Equations (7.5 ECTS)
The course is usually given on demand.
Autumn 2013
FMNN25F Advanced Course in Numerical Algorithms with Python/SciPy (7.5 ECTS)
The course is usually given each autumn term.
Autumn 2014
FMS010F Stationary Stochastic Processes (10.0 ECTS)
The course is usually given on demand.
Spring 2013
FMS015F Theory of Stochastic Processes (7.5 ECTS)
The course is usually given on demand.
Spring 2014
FMS020F Statistical Inference for Partially Observed Stochastic Processes (7.5 ECTS)
The course is usually given on demand.
Spring 2016
FMS092F Monte Carlo Methods for Statistical Inference (7.5 ECTS)
The course is usually given each spring term.
Spring 2014
FMS155F Statistical Modelling of Extreme Values (7.5 ECTS)
The course is usually given each spring term.
Spring 2014
FMSN35F Stationary and Non-stationary Spectral Analysis (7.5 ECTS)
The course is usually given every other spring.
Spring 2014
MATM13F Differential Geometry (7.5 ECTS)
The course is usually given each autumn term.
Autumn 2018
MATM15F Number Theory (7.5 ECTS)
The course is usually given each autumn term.
Autumn 2018
MATM16F Topology (7.5 ECTS)
The course is usually given each spring term.
Spring 2018
MATM19F Integration Theory (7.5 ECTS)
The course is usually given each spring term.
Autumn 2018
MATM30F Mathematical Foundations of Probability (7.5 ECTS)
The course is usually given each autumn term.
Autumn 2018
MATP11F Distribution Theory (7.5 ECTS)
The course is usually given on demand.
Autumn 2019
MATP22F Complex Analysis in Several Variables (7.5 ECTS)
The course is usually given on demand.
Spring 2019
MATP29F Specialised Course on Integration Theory (7.5 ECTS)
The course is usually given each spring term.
Autumn 2018
NUMA01F Computational Programming with Python (7.5 ECTS)
The course is usually given once each term.
Autumn 2018
FMA051F Optimization (6.0 ECTS)
The course is discontinued and will no longer be given.
Autumn 2013
FMA120F Matrix Theory (7.5 ECTS)
The course is discontinued and will no longer be given.
Autumn 2013
FMA260F Functional Analysis and Harmonic Analysis (7.5 ECTS)
The course is discontinued and will no longer be given.
Autumn 2013

Automatic Control

Code Name Course plans
FRT001F Linear Systems (9.0 ECTS)
The course is usually given on demand.
Autumn 2015
FRT016F Convex Optimization with Applications (7.5 ECTS)
The course is usually given on demand.
Autumn 2019
FRT032F Game Theory (8.0 ECTS)
The course is usually given on demand.
Autumn 2014
FRT085F Convex Optimization - Project (2.5 ECTS)
The course is usually given on demand.
Spring 2013
FRT090F Advanced PID Control (7.5 ECTS)
The course is usually given on demand.
Spring 2013
FRT095F Network Dynamics (9.0 ECTS)
The course is usually given on demand.
Autumn 2013
FRT100F Distributed Control (6.0 ECTS)
The course is usually given on demand.
Spring 2014
FRT105F Optimal Control (7.5 ECTS)
The course is usually given on demand.
Spring 2014
FRT110F Advanced Computer Controlled Systems (6.0 ECTS)
The course is usually given on demand.
Spring 2014
FRT115F System Identification (7.5 ECTS)
The course is usually given on demand.
Autumn 2014
FRT120F Julia for Scientific Programming (5.0 ECTS)
The course is usually given on demand.
Autumn 2015
FRT125F Robust Control (9.0 ECTS)
The course is usually given on demand.
Spring 2015
FRT130F Programming Languages and Concepts (7.5 ECTS)
The course is usually given on demand.
Spring 2016
FRT135F History of Control (3.0 ECTS)
The course is usually given on demand.
Autumn 2016
FRT140F Project in Automatic Control (7.5 ECTS)
The course is usually given each autumn term.
Autumn 2016
FRT145F System Modeling and Identification (7.5 ECTS)
The course is usually given each autumn term.
Autumn 2016
FRT150F Mathematical Modelling, Advanced Course (4.5 ECTS)
The course is usually given each spring term.
Spring 2017
FRT155F Control System Synthesis (10.0 ECTS)
The course is usually given on demand.
Spring 2016
FRT160F Real-time and Embedded Systems with Applications to Machine Learning (5.0 ECTS)
The course is usually given on demand.
Spring 2017
FRT165F Autonomous Systems (12.0 ECTS)
The course is usually given on demand.
Autumn 2016
FRT170F Deep Learning - Study Circle (7.5 ECTS)
The course is usually given on demand.
Autumn 2016
FRT175F Lab Development in Automatic Control (7.5 ECTS)
The course is usually given on demand.
Autumn 2017
FRT180F Motion Planning and Control with Project Part (9.0 ECTS)
The course is usually given on demand.
Autumn 2017
FRT185F Feedback Control of Computing Systems (5.0 ECTS)
The course is usually given on demand.
Autumn 2017
FRT190F Project in Autonomous Systems (6.0 ECTS)
The course is usually given on demand.
Autumn 2018
FRT195F Autonomous Systems Part 1 (6.0 ECTS)
The course is usually given on demand.
Spring 2018
FRT200F Autonomous Systems Part 2 (6.0 ECTS)
The course is usually given on demand.
Autumn 2018
FRT205F Study Circle in Reinforcement Learning (5.0 ECTS)
The course is usually given on demand.
Spring 2019
FRT210F Project in Reinforcement Learning (3.0 ECTS)
The course is usually given on demand.
Spring 2019
FRTN01F Real-Time Systems (10.0 ECTS)
The course is usually given each spring term.
Spring 2017
FRTN05F Non-Linear Control and Servo Systems (7.5 ECTS)
The course is usually given each autumn term.
Autumn 2016
FRTN10F Multivariable Control (7.5 ECTS)
The course is usually given each autumn term.
Autumn 2016
FRTN15F Predictive Control (7.5 ECTS)
The course is usually given each spring term.
Spring 2017
FRTN20F Market-Driven Systems (7.5 ECTS)
The course is usually given each spring term.
Spring 2017
FRTN25F Automatic Process Control (7.5 ECTS)
The course is usually given each spring term.
Spring 2016
FRTN30F Network Dynamics (7.5 ECTS)
The course is usually given each spring term.
Spring 2017
FRT015F Convex Optimization with Applications (7.5 ECTS)
The course is discontinued and will no longer be given.
Spring 2013
Page Manager: FUD_support@lth.lu.se | 2019-10-15